Ecocut
Special Features
- Travel X x Y : 250 x 350 mm
- Max. work-piece height : 150 mm
- Max. table size : 370 x 600 mm
- Max. cutting speed : 70 mm2/ / min
- Taper : ± 5° over 50 mm
- Best surface finish : 1.2 µ Ra
- Compact Footprint
- e-Pulse technology
Sprincut Win
Special Features
- Travel X x Y : 300 x 400 mm
- Max. work-piece height : 250 mm
- Max. table size : 440 x 650 mm
- Max. cutting speed : 170 mm2/ / min
- Taper : ± 30° over 50 mm
- Best surface finish : 0.8 µ Ra
- e-Pulse technology
Sprincut Dlx
Special Features
- Travel X x Y: 600 x 400 mm
- Max. work-piece height : 350 mm
- Max. table size : 910 x 580 mm
- Max. Cutting speed : 170 rnm2//rnm
- Taper : ± 30° over 50 mm
- Best surface finish : 0.8 p Ra
- 4 1/2 axes control (Z axis on display)
- Long life mineral bed filtration (DL 35 Unit)
Euromark CNC Wirecut EDM
Special Features
- ELCAM-Windows-based powerfull part programing software
- Max. cutting speed:200mm2 per min.
- Best surface finish:0.60 uRa
- 16-step programmable flushing
- 15 inches LCD screen
- Semi-automatic wire threading system (optional)**
- 4 1/2 Axis control (axis on display)
- Direct coupled AC servo motor (X, Y, u, v)
- Long life mineral bed filtration
Ultima Series-Flush type
Special Features
- Compact footprint
- Directly coupled AC servo motors
- Wire spool capacity : 8 kg
- Stainless steel, non-corrosive, hardened, square work table
- Resin bowl of 20 lit. capacity
- LCD touch panel
- Optional Auto Wire Threading (AWT)
eNova series- submerged type

Machine Tool | eNova 0S | eNova 1S | eNova 2S |
Main axes traverse (X, Y) | 320 x 220 mm | 400 x 300 mm | 600 x 400 mm |
Aux. axes traverse (u, v) | 100 x 100 mm | 100 x 100 mm | 120 x 120 mm |
Work table size | 600 x 400 mm | 680 x 500 mm | 900 x 580 mm |
Max. taper angle | 350/50 mm | 350/50 mm | 350/50 mm |
Max. work piece height | 200 mm | 300 mm | 350 mm |
Max. work piece weight | 500 kg | 500 kg | 1000 kg |
Resolution | 0.0005 mm | ||
Max. wire spool capacity | 8 kg (16-45 kg optional with de-coiler) | ||
Wire electrode diameter | 0.25 mm (standard) 0.1, 0.15, 0.2, 0.3 (optional) | ||
Wire spool size | DIN 125, DIN 160, P-3-R, P-5-R | ||
Pulse Generator | |||
Max. machining current | 25 A | ||
CNC controller | Turbo | ||
Controlled axes | X,Y,u,v,Z simultanous/independent | ||
Least input increment | 0.001 mm | ||
Least command input (X,Y, u, v,Z) | 0.0005 mm | ||
Input power supply | 3 phase AC 415V (±1%) 50 Hz (Alternate voltage/frequency ratings available on request) | ||
Connected load | 13 kVA | ||
Average power consumption | 11 kVA | ||
Data input/output | Wireless keyboard & Optical mouse, USB port, Ethernet port (LAN) |
Dielectric Unit | |||
Dielectric fluid | De-ionized water | ||
Dielectric tank capacity | 700 Liters | 850 Liters | 1300 Liters |
De-ion capacity | 16 Liters | ||
Paper filter | Inside out type, 10 μ | ||
Dielectric cooling capacity | 2100 kCal. |