| Specification | ARJUN Plus V700 P |
| Axis Travel | |
| X-Travel | 700mm |
| Y-Travel | 400mm |
| Z-Travel | 400mm |
| Spindle Nose to Table Surface | 150 – 550mm |
| Work Table | |
| Table Surface Dimension (X, Y) | 850×410 |
| T-Slot Dimension/ No./ Pitch | 18mmx3x125mm |
| Table Height | 970mm |
| Maximum Table Weight | 400 kg |
| Spindle | |
| Spindle Motor Power (Cont./30 min) | 5.5/7.5 Kw |
| Spindle Motor Coupling | Direct Drive |
| Spindle Speed | 8,000 rpm, 10,000 with spindle chiller |
| Tool Type | BT #40, 4-Ceremic bearing – 2-Front, 2-Rear (BBT # 40 Optional) |
| Spindle Bearing – Inner Diameter Spindle Material / Hardness | 60mm Shaft SAE 8620 / HRC 58-60 |
| Spindle Runout | 0.002mm At Bore Taper ,On 300mm Mandrel – 0.08mm |
| Retention System / Holding Capacity | 700 ± 100 KgF |
| Axis Feeds | |
| Rapid Traverse – X/Y/Z | 48/48/48 m / minute |
| Rated Cutting Feedrate – X/Y/Z | 20/20/20 m/min. |
| Mechanical Way System – X/Y/Z | 30R/30R/35Rmm width |
| Axis Drive Motor Power – X, Y/Z | 2/2/3 Kw |
| Axis Thrust Force – X, Y/Z | 13.7/13.7/22.5 Nm |
| Ballscrews – X, Y, Z | 32mm Ballscrews, 16mm Pitch |
| Positioning Accuracy – X/Y/Z | 0.010mm |
| Positioning Repeatability – X/Y/Z | 0.006mm |
| Least Input Command Increment | 0.001mm |
| Tool Changer | |
| Tool Capacity | 24-Tools, Arm Turret (Option) |
| Tool Shank | BBT 40 (Option) |
| Tool Change Time | 1.5-sec. tool-to-tool, |
| Maximum Tool Diameter / withMaximum Tool Diameter / with | 75mm with no adjacent tool/ |
| adjacent tool | 150mm w/o Adj. Tool |
| Maximum Tool Length / Weight | 250mm / 8 kg |
| Tool Selection / Tool Access | Random access Bi-directional shortest path |
| Specifications | |
| Air Service Requirements | 6 Kg/cm2 |
| Connected Load Coolant Tank Capacity | 22 Kva 300 liters |
| Coolant Pump – LPM /Pressure | 200 LPM , 2 Bar |
| Floor space requirements (L x W x H) | 3100*x2400x2800 mm |
| Machine Weight | 5500 kg |
